Building the Eclipson Skyward

3 vistas

nsom

22 Julio 2026

⁣Whether you are a complete beginner looking for a forgiving first trainer or a pro pilot wanting a stress-free, relaxing cruiser, the Skyward was designed for you. Following the success of my first free "Model A" glider, this 1.5m hybrid aircraft takes everything I learned to the next level!

The Skyward features a high-wing design for incredible stability and integrated flaps to make your landings as smooth as possible. With its hybrid PLA, LW-PLA, and Carbon Fiber construction, it's tough enough for the field but light enough for a 23km/h stall speed.

📥 GET THE FILES

Ready to start your build?
Get the STL files here: 🔗 Link: [https://www.eclipson-airplanes.com/tr...]
🎟 USE CODE: 3jw for 10% OFF all models! (Limited time only!)
Official Website : https://www.eclipson-airplanes.com

📊 SPECIFICATIONS

Wingspan: 1500mm (59")
Length: 1080mm
Take-off Weight: 1600g
Stall Speed: 23km/h (Perfect for beginners!)
Wing Loading: 48g/dm²
Aspect Ratio: 6.8

Filament I used :-
ASA Aero (for wings / fuselage ) : https://shorturl.at/ih2fw
PLA Aero : https://shorturl.at/OYVlO
PLA (for fuselage/landing gear) : https://shorturl.at/8McNt
ABS (for motor mount ) : https://shorturl.at/TQWI7
TPU ( for Tyres ) : https://shorturl.at/Kbehz

⚡ RECOMMENDED ELECTRONICS

To get the best performance out of your Skyward, here is what you'll need:

Motor: DYS D3536-6 1250kv
ESC: 50A ESC [ i used 80A ESC ]
Servos: [ 7x 9g Micro Servos]
Propeller: [11x45]
Battery: [3S 2200mAh - 4S 3300mAh]
Servo extension leads : 4 pcs
Pushrod Linkage Stopper
FLYSKY Radio

🔌 WIRING & RECEIVER CONNECTIONS

CH 1: Ailerons (using Y-harness both servo connected )

CH 2: Elevator

CH 3: Throttle (ESC)

CH 4: Rudder / Nose Steering ( both connected though Y- harness )

CH 5: Left Flaps

CH 6 : Right Flaps

(Note: Double-check your transmitter wing type settings!)

if you need transmitter setup then please commnet below i will make video on that.

📱 FOLLOW THE JOURNEY

Check out behind-the-scenes footage and upcoming designs: 📸 Instagram: https://www.instagram.com/3jwings/?hl=en

🎵 Music: YouTube Audio Library

Thanks for watching, and happy flying!